An electrical inspection typically costs about $150 to $315 for a home in national price guides, with an average near $215. A panel-only check runs less, and a whole-house wiring inspection runs more. This is a rough guide from one published guide, and the quote you get from a local electrician overrides them. This page is the price side of the residential electrical inspection hub, which explains what each kind of inspection covers. It also covers the California code editions people search for.
How much does it cost to have an electrical inspection done?
National price guides put a standard residential electrical inspection at about $150 to $315, with an average near $215. A panel inspection runs about $110 to $230. A whole-house wiring inspection runs about $220 to $490, and a whole-house check carries the top of that spread.
| Type of inspection | Typical range, 2026 guides |
|---|---|
| Overall home electrical inspection | $150 to $315 |
| Electrical panel inspection | $110 to $230 |
| Whole-house wiring inspection | $220 to $490 |
Only one published guide could be read for these figures, so treat the table as a rough guide, not a Stockton price list. Scope and market change the price a lot.
What changes the price of an electrical inspection?
Price rises with house size, age of the system, hard-to-reach panels and attics, and the depth of the check. A visual look at the panel costs less than testing every circuit, scanning with a thermal camera or writing a detailed report for an insurer or buyer.
Other factors:
- Age. Older homes with fuse boxes, aluminum wiring or knob and tube wiring take longer.
- Size. More rooms, circuits and outbuildings.
- Access. Locked panels, finished attics, crawl spaces.
- Add-ons. Outlet mapping, thermal imaging, whole-house surge checks, or ground fault and arc-fault testing of components such as breakers and outlets. See GFCI and AFCI.
- Purpose. Pre-purchase, insurance, landlord, or a safety check after a storm.
- Fix work. An inspection that finds problems leads to repair quotes, which are separate.
Ask whether the inspection fee is credited if you hire the same electrician for repairs. Some do, some do not.
What is considered a rough electrical inspection, and who pays for it?
A rough electrical inspection is the city or county check done after wiring is installed in the framing and before walls close. The permit holder pays the permit fee, which normally includes the inspections that go with it. A failed inspection can mean a re-inspection fee, so ask your electrician how that is handled.

San Joaquin County says the permit fee amounts are in its adopted fee schedule, and that payment is made after intake of the application. The City of Stockton has its own fee schedule and online permit portal. Permit fees are not listed here because they change, so check with the building department that covers your address.
Rough inspections are part of the electrician's job price on new wiring, remodels and additions. You usually do not hire and pay for them separately. For what the inspector checks, see what a residential electrical inspection involves.
What are typical electrician prices in Stockton?
There is no Stockton-specific price data here, so these are published national 2026 ranges. Electricians commonly charge about $50 to $130 an hour, with apprentices lower and master electricians higher, plus a service call fee of about $100 to $200. Evening, weekend and emergency calls often add $100 to $200 or cost 1.5 to 2 times the normal rate.
Many electricians price by the job, not the hour. Ask what the quote covers, whether there is a minimum, and what happens if the work runs long. The electrician cost in Stockton page goes through service calls and rates, and panel replacement cost covers the biggest inspection-linked job.
Which California electrical code applies to my inspection?
California's current electrical code is the 2025 California Electrical Code, based on the 2023 National Electrical Code, with California changes. The California Building Standards Commission filed it and set an effective date of January 1, 2026. Cities and counties can add local amendments, and permit applications are generally checked against the code in force when they are filed.
California revises its codes on a three-year cycle. Searches for older editions are common because people look up the rules that applied when a house was built or permitted.
| Edition | Based on the NEC | Notes |
|---|---|---|
| 2025 California Electrical Code | 2023 | Effective January 1, 2026 |
| 2022 California Electrical Code | 2020 | Effective January 1, 2023 |
| 2019 California Electrical Code | 2017 | Effective January 1, 2020 |
| 2016 and 2013 editions | 2014 and 2011 | Older projects and inspections |
The state publishes the current code on its Building Standards Commission pages, so you can read the current text there instead of paying for a PDF copy. Residential work also touches the California Residential Code and Energy Code. Your electrician or the building department tells you which sections apply to a given job. The next adoption of the NEC in California is not expected until later in this decade.
Most homeowners never read the code. What matters is that a permit inspection checks the work against the edition in force, and an older house is not forced to meet new code until it is altered. That is why a safety inspection of an old house often lists "not required by code, but recommended" items.
Questions people ask
How long does an electrical inspection take?
A panel check often takes under an hour, and a full-house inspection commonly takes one to three hours, longer for older or larger homes. Add-ons like thermal scanning take more time. The price follows the time and scope, so ask for the visit length and when you will get the written findings.
What should I ask before I hire someone for an electrical inspection?
Ask what the price covers, whether it is visual or tested, who does it and what license they hold, what the report includes, and whether the fee is credited toward repairs. For work done for you, California requires a C-10 electrical contractor for repairs, so check the license on the CSLB site before you accept a repair quote.
Do I need to be home for an electrical inspection?
Usually yes, or someone you trust. The inspector needs access to the panel, garage, attic and crawl space, and may switch off power for a short time. For a city or county permit inspection, an adult normally needs to be on site, or the contractor handles access. Confirm when you book.
Is the inspection fee refunded if I hire the same electrician?
Sometimes. Some electricians credit the fee toward repairs, and some do not. There is no rule. Ask before you book, and get the offer in writing. If you only need the inspection and want separate repair quotes, say so. The quote form lets you describe the job, and a Stockton electrician can respond with options.
Sources used
Last changed
