Published 2026 US price guides put a typical electrician at about $50 to $130 an hour, plus a service call fee of roughly $100 to $200, and small jobs often come to a few hundred dollars. Panel upgrades run into the thousands. A quote from an electrician in Stockton can sit above or below national figures. This is a guide, not a price list. For the wider picture of finding a local electrician, start with the home page.
How much is an electrical service?
An electrical service visit, where an electrician comes out, finds the fault and fixes something small, commonly lands between about $150 and $400 in national price guides. Add parts and any permit. A visit that only diagnoses a problem can cost less, and a visit that turns into a bigger repair costs more.
Most of that range is the service call fee plus an hour or two of labor. A few examples of per-job ranges from a 2026 US guide, nationwide estimates:
| Job | Typical range |
|---|---|
| Replace an outlet | $80 to $350 |
| Install a new outlet | $140 to $320 |
| Replace or add a GFCI outlet | $100 to $300 |
| Install a ceiling fan | $100 to $400 |
| Replace a single breaker | $150 to $400 |
| Replace a main panel | $1,500 to $4,000 |
| Subpanel | $500 to $1,500 |
| Rewire a 1,500 square foot house | $6,000 to $16,000 |
Ranges overlap because each guide counts different labor, parts and access. Use them to tell whether a quote is plausible, not to set a price.
For specific jobs, see ceiling fan installation cost, GFCI outlet installation cost, replacing an electrical panel and rewiring a house.
What do electricians usually charge?
Electricians usually charge either by the hour or a fixed price per job, plus parts. Small and uncertain jobs are often hourly, and well-defined jobs such as a panel swap or a ceiling fan are often a flat quote after a look. Many also add a service call or minimum fee for the visit.
Expect your quote to include these parts:
- Labor: the time on site at the electrician's rate.
- Materials: wire, devices, breakers, fixtures and boxes, often marked up.
- Trip or service call fee: for traveling to your house and assessing.
- Permit and inspection: if the work needs one, this is a city fee, separate from labor.
- Cleanup and patching: sometimes included, sometimes not. Ask.
A flat quote is easier to compare than an hourly estimate, as long as the scope is identical. Ask each electrician to list what is included, what is not and what could change the price.
What do electricians normally charge per hour?
Typical published hourly rates are $50 to $130, with experience driving the spread. One 2026 guide lists apprentices at $40 to $60, journeyperson electricians at $60 to $90 and master electricians at $90 to $120 an hour.

Why the rate is not the same as pay: the U.S. Bureau of Labor Statistics reports a national median wage for electricians of $30.38 an hour in May 2025, and its California mean wage series shows about $41 an hour for the same period. A business has to charge more than that, because the rate covers insurance, a vehicle, tools, licensing, overhead and the time not spent on billable work. That gap explains why a "cheap" hourly rate may come from someone who is not carrying those costs. A California electrical contractor must hold a CSLB license and, if there are employees, carry workers' compensation coverage.
A self-employed electrician who holds a C-10 license charges for the same overheads as a larger business, and may be priced lower because there is less office cost. A person without a license may be cheaper, but California law requires electrical work for others to be done by a C-10 contractor, and CSLB warns that the risks outweigh the savings.
How much should an electrician service call cost?
Most national price guides put a service call or trip fee at about $100 to $200. It usually covers travel and the first assessment. Some electricians credit it toward the repair if you go ahead, and some waive it. A few charge a diagnostic fee on top, so ask what the fee covers and when it applies.
Questions to ask about it:
- Is the fee flat or does it include the first hour?
- Is it credited if I approve the work?
- Do you charge extra for evenings or weekends?
- What is the minimum charge if the job is short?
After-hours calls cost more. The full breakdown is in emergency electrician cost.
How much is an electrician for a day?
Few homeowners pay by the day, but a full day of labor at published hourly rates is roughly eight hours times the rate, which works out to about $400 to $1,040, before parts and permits. This is a simple calculation from the hourly range, not a published day rate. Most residential jobs are quoted per project instead.
A day rate makes sense for a larger project such as a remodel, where an electrician may visit more than once to run wire before drywall and install devices afterward. Ask for a written schedule and a total price, not an open-ended day rate. If a project involves a commercial space or a mixed-use building, the pricing and permits differ, so say so when you ask for a quote.
How do you compare electrician quotes?
Compare quotes by scope first and price second. Get at least three written quotes for the same work, as CSLB advises. Check that each one lists the same devices, the same permit arrangement and the same cleanup. An unusually low bid may mean a mistake, omitted work or corner-cutting, according to CSLB.
A quick checklist:
- The CSLB license number is on the quote and the record shows C-10 and an active status.
- The quote lists what is included and excluded.
- It says who obtains the permit.
- The payment schedule is clear. A down payment cannot legally exceed 10 percent of the contract price or $1,000, whichever is less, under CSLB's rules for home improvement contracts. Contracts over $500 must be in writing.
- The start date and an expected finish are written down.
For help choosing, see how to choose an electrician, or use the quote form to ask local electricians to quote the same job. If you are cost-conscious, ask about timing: weekday daytime visits are normally the cheapest, and combining several small jobs into one visit saves repeated service call fees.
What makes electrician prices higher or lower in Stockton CA?
Prices in Stockton CA depend on the age of the house, the condition of the panel, how easy it is to reach the wiring, the permit fee and the time of day. Older houses frequently cost more because walls and ceilings have to be opened and old wiring may not meet today's code. New builds and open framing cost less.
Other drivers:
- A small panel or an old fuse box that needs upgrading before new circuits can be added.
- Whether work is inside the house or involves a crawlspace or attic.
- Material choices, such as the brand and amperage of a panel.
- How soon you need it. Booking a weekday slot a few days ahead is usually the cheapest route.
Questions people ask
How much does electrical repair cost?
A small repair, such as replacing an outlet or switch, often costs $150 to $350 including a service call. Fixing a breaker, tracing a fault or replacing a fixture can reach several hundred dollars. Larger repairs depend on access and parts. See electrician to fix breaker cost for one common job.
What does a good electrician charge per hour?
Good electricians do not all charge the same. Published hourly ranges run from $50 to $130, with master electricians at the top. A higher rate is not proof of quality and a lower one is not proof of a bargain. Check the CSLB record, the written scope and what the price includes before you compare numbers.
What are the electrician rates for 2026?
National price guides cluster around $50 to $130 an hour for residential work, with service calls of $100 to $200 and after-hours work adding $100 to $200 or costing about 1.5 to 2 times the usual rate. Ask each electrician for their current rate and minimum charge in writing.
How do I calculate electrical labor cost?
Multiply the hours by the hourly rate, then add the service call fee, materials and any permit. A job of three hours at $100 an hour with $60 of parts and a $100 call fee would be about $460. Most electricians quote a fixed price instead, based on their own estimate of time.
How much should I expect to pay for electrical work?
Expect to pay for the electrician's time, the parts and the permit, and expect a written quote. If a price is far below the rest, ask what has been left out. Guide ranges are only a check. The electrician's own written estimate, based on your house, is the price that matters.
Sources used
- Published 2026 national electrician rate guide
- Published 2026 national outlet cost article
- Published 2026 national panel replacement cost article
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, Electricians, California (May 2025)
- U.S. Bureau of Labor Statistics, Electricians (May 2025 pay data)
- CSLB, how to find the right contractor
- CSLB, contracts and binding agreements
Last changed
